{"title":"Controls","description":"\u003cp\u003eHandlebar hardware and line routing for a finished cockpit. Billet bar ends machined in-house from solid 6061 aluminum, and 3D-printed brake line clips for clean speedo sensor wire routing along the fork.\u003c\/p\u003e\u003cp\u003eBoth are universal fitment. They were developed on our own Honda CB550 builds, but they will work on just about anything with 7\/8 inch bars and a front brake line.\u003c\/p\u003e","products":[{"product_id":"brake-line-clips","title":"Brake Line Clips","description":"\u003cp\u003e\u003cstrong\u003ePack of 6 Brake Line Clips.  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRoute your speedo sensor wire up the brake line like they do on production motorcycles. These clips work with most front brake lines and are 3D printed out of tough ASA material.  These are used on all bikes with a electronic speedo sensor. \u003c\/p\u003e\n\u003cp\u003eYou will get 6 clips. This is enough to cover the length of most motorcycles. If you have a taller bike I would recommend getting two packs to cover the entire brake line if needed. ie. A chopper or something with extended front end. \u003c\/p\u003e\n\u003cp\u003ePlease email me if you have any questions. Kyle@thirteenandcompany.com \u003c\/p\u003e","brand":"Thirteen and Company","offers":[{"title":"Default Title","offer_id":44669429416022,"sku":"TM-BLC6","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/5196\/5526\/files\/Clip1.jpg?v=1778127366"},{"product_id":"billet-bar-ends-7-8","title":"Billet Bar Ends 7\/8\"","description":"\u003cp data-sourcepos=\"10:1-10:27;292-318\" class=\"font-claude-response-body break-words whitespace-normal\"\u003e\u003cstrong\u003eBillet Bar Ends — 7\/8\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-sourcepos=\"12:1-12:323;320-642\" class=\"font-claude-response-body break-words whitespace-normal\"\u003eMachined in-house from solid 6061 aluminum bar stock, these bar ends are cut, not cast — every piece starts as a single billet and leaves the machine as a finished part. The result is a dense, substantial weight in your hand and a face that carries the Thirteen Motorcycles mark, recessed and engraved so it won't rub off.\u003c\/p\u003e\n\u003cp data-sourcepos=\"14:1-14:402;644-1045\" class=\"font-claude-response-body break-words whitespace-normal\"\u003eThey install in minutes with a stainless-hardware rubber bung: slide the assembly into the open end of your handlebar and tighten the stainless nut until the rubber bung presses firmly against the inside of the bar. Once seated, it holds by press fit — nothing else needed. No adhesives, no drilling, no guesswork. The extra mass at the ends also helps take the buzz out of your grips on longer rides.\u003c\/p\u003e\n\u003cp data-sourcepos=\"16:1-16:92;1047-1138\" class=\"font-claude-response-body break-words whitespace-normal\"\u003eFits standard 7\/8\" (22mm) hollow handlebars. Sold as a matched pair with hardware included.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\" data-sourcepos=\"18:1-18:12;1140-1151\" class=\"font-claude-response-body break-words whitespace-normal\"\u003e\u003cstrong\u003eDetails\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachined from solid 6061 aluminum billet\u003c\/li\u003e\n\u003cli\u003eFits 7\/8\" (22mm) hollow handlebars\u003c\/li\u003e\n\u003cli\u003eStainless-hardware rubber bung — press fit, no glue, no drilling\u003c\/li\u003e\n\u003cli\u003eEngraved Thirteen Motorcycles \u003c\/li\u003e\n\u003cli\u003eAdds weight to reduce grip vibration\u003c\/li\u003e\n\u003cli\u003eMade in small batches, sold as a pair (hardware included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"text-align: left;\" data-sourcepos=\"26:1-26:17;1440-1456\" class=\"font-claude-response-body break-words whitespace-normal\"\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove any existing bar end or plug.\u003c\/li\u003e\n\u003cli\u003eInsert the rubber bung assembly into the open end of the handlebar.\u003c\/li\u003e\n\u003cli\u003eTighten the stainless nut so the rubber bung presses firmly into the bar. Once seated it's a press fit — that's all it takes to hold.\u003c\/li\u003e\n\u003cli\u003eRepeat on the other side. Done.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Thirteen Motorcycles","offers":[{"title":"Default Title","offer_id":45302553346134,"sku":"TM-BE78","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/5196\/5526\/files\/DSC1694.jpg?v=1783399989"}],"url":"https:\/\/thirteenmotorcycles.com\/collections\/controls.oembed","provider":"Thirteen Motorcycles","version":"1.0","type":"link"}